SANlight FLEX II Driver 240W

Beskrivning

SANlight FLEX II Driver 240W by SANlight

The SANlight FLEX II Driver 240W is a central power supply for larger FLEX II installations with several linear SANlight modules. It is used when multiple FLEX II luminaires should be powered from one shared driver and connected cleanly through suitable splitter cables.

The driver is designed for up to nine FLEX II 25, eleven FLEX II 20 or twenty two FLEX II 10 modules. According to the current SANlight FLEX II datasheet, it can also power up to fifteen FLEX II 15 modules. This places the 240W driver clearly above the 150W version and makes it suitable for longer plant shelves, multilayer systems and larger supplementary lighting layouts.

On the output side, the driver uses a WDC21 DC connector. To distribute power to individual FLEX II modules, suitable SANlight 21/19 splitters are required, such as the 2 way or 4 way Y splitter. The right splitter depends on the number of modules and the cable routing in the setup.

The AC connection uses a Wieland plug. For practical installation, the driver should therefore be planned as part of a complete FLEX II system: driver, power cable, splitters, module types and total load need to match technically.

It is important not to exceed the maximum module configuration. The 240W driver provides more capacity than smaller FLEX II power supplies, but it does not replace proper load planning. Number of modules, module types and connection path should be checked before installation.

Key facts

• Brand: SANlight
• Series: FLEX II Series
• Model: FLEX II Driver 240W
• Item number: AI2007
• Product type: driver for SANlight FLEX II modules
• Power: 240 W
• DC connector: WDC21
• AC connector: Wieland plug
• FLEX II 25 compatibility: up to 9 × FLEX II 25
• FLEX II 20 compatibility: up to 11 × FLEX II 20
• FLEX II 15 compatibility: up to 15 × FLEX II 15
• FLEX II 10 compatibility: up to 22 × FLEX II 10
• Matching splitters: SANlight FLEX II 2 way or 4 way Y splitter 21/19
• Input voltage: 100 to 240 V AC
• Max. input current: 2.2 A at 120 V AC, 1.1 A at 220 V AC
• Minimum load: 10 W, minimum 1 × FLEX II 10
• Permitted ambient temperature: minus 40 to 90 °C
• Max. relative humidity: 90 %
• Dimensions: 242 × 67 × 33 mm
• Weight: 0.99 kg
• System note: match module types, total load and splitter layout before installation

Sold and shipped by Cannoptikum (Cannoptikum KG, Rinn, Austria). Seeds ship worldwide; grow-shop products ship within the EU. Prices are set by the vendor and you complete your purchase on their site. Adults only.