GrowControl CO2 ventil, regulátor tlaku

Popis

Controlled CO₂ delivery with a directly readable flow rate

The GrowControl CO2 Valve, Pressure Regulator combines a pressure regulator with an electrically operated CO₂ switching valve to deliver gas from a suitable cylinder into your grow room. This pre-assembled unit suits indoor growers setting up sensor-based CO₂ enrichment or adding to an existing system.

Set the gas flow and check cylinder pressure

You can adjust the CO₂ flow within a range of approx. 5–20 l/min and read the value directly on the regulator. A separate gauge shows the residual pressure in the connected cylinder. These readings refer to gas flow and cylinder pressure; they do not measure the CO₂ concentration in the grow room.

Add a controller and sensor for automatic regulation

The switching valve is operated at 230 V. Automatic regulation requires a suitable controller, such as the GrowControl GrowBase climate controller, together with a GrowControl CarbSense CO₂ sensor. The sensor measures the CO₂ concentration in the room, allowing the controller to manage the gas supply accordingly. The controller, sensor and CO₂ cylinder are not included.

Check the cylinder connection before installation

The fitting uses a W 21.8 × 1/14″ connection to DIN 477 No. 6. Check that your cylinder valve matches this specification before connecting it. The hose and connection cable form part of the pre-assembled unit. Follow the safety instructions supplied with your CO₂ cylinder and controller during installation and use.

Technical details:

• Product type: CO₂ fitting with pressure regulator and electrically operated switching valve
• Application: Controlled CO₂ delivery from a gas cylinder to enrich room air
• Adjustable CO₂ flow: Approx. 5–20 l/min
• Gauges: CO₂ flow rate and residual cylinder pressure
• Cylinder connection: W 21.8 × 1/14″ to DIN 477 No. 6
• Supply voltage: 230 V AC
• Frequency: 50–60 Hz
• Current consumption: 40 mA
• Dimensions (L × W × H): Approx. 20 × 20 × 8 cm
• Hose length: Approx. 3 m
• Cable length: Approx. 2.5 m
• Assembly: Fully assembled
• Additional equipment required: Suitable controller, compatible CO₂ sensor and CO₂ cylinder
• Included: CO₂ pressure regulator, CO₂ switching valve, connection cable with connectors and matching hose

Sold and shipped by Growmart (Hamburg, Germany), which delivers across Europe with DHL. Prices are set by the vendor and you complete your purchase on their site.