Aqua Master Tools C30 doseerpomp voor EC-regeling

Beschrijving

Automatically dose three nutrient components for controlled EC management

The Aqua Master Tools C30 Pump is a dosing unit with three peristaltic pumps for automatic nutrient delivery in irrigation and hydroponic systems. Designed for use with the Aqua Master Tools C800 Pro Controller, it allows three different nutrient components to be supplied through separate pumps. The C30 does not measure EC itself; instead, it carries out dosing as directed by the controller. It is intended exclusively for nutrient and EC dosing and is not suitable for pH regulation.

Three pumps for multi-part nutrient programmes

Each peristaltic pump has a standard flow rate of 90 ml per 60 seconds, equivalent to 1.5 ml per second. According to the manufacturer, the actual flow rate can vary with the temperature and viscosity of the liquid being dosed. When the C30 is used with the C800 Pro, its three pumps are assigned as pumps 1, 2 and 3, making it straightforward to integrate multi-part nutrients into an automated EC-control system.

Modular expansion for up to five EC pumps

The C30 can be expanded when a nutrient programme requires additional dosing channels. Combining it with a C10 provides four EC pumps, while adding a C20 increases the system to five. The units are mechanically joined using the side slide rail and electrically linked with the supplied 50 cm UTP cable. A separate 150 cm UTP cable connects the C30 to the C800 Pro. Further equipment for monitoring and managing nutrient solutions can be found in Growmart’s pH and EC meters and regulators range.

Manual priming and independent EC checks

Each pump has its own manual priming button, allowing you to fill or empty the tubing during installation and maintenance without waiting for an automatic dosing cycle. For separate conductivity checks alongside the automated system, Growmart also offers a range of EC meters.

Technical details:

• Product type: Dosing unit with three peristaltic pumps
• Application: Nutrient dosing and EC control
• Number of pumps: 3
• Flow rate per pump: 90 ml per 60 seconds or 1.5 ml/s, depending on temperature and viscosity
• Compatibility: Aqua Master Tools C800 Pro Controller
• Expansion: C10 for a total of 4 or C20 for a total of 5 EC pumps
• Maximum controller configuration: 5 EC pumps plus 1 separate pH pump
• Manual operation: Separate priming button for each pump
• Operating temperature: 5–50 °C
• Noise level: <60 dB
• Power supply: 85–260 V AC, 50–60 Hz
• Rated voltage: 12 V
• Power: 6 W
• Peristaltic tube lifetime: 1,000 hours
• Motor lifetime: 800 hours
• Dimensions: 197 × 159 × 100 mm
• Weight: 706 g
• Article number: AMT1063
• EAN: 8721249602146
• Scope of delivery: C30 dosing unit with 3 pumps, 3 × 3 m tubing, 150 cm UTP controller cable, 50 cm UTP expansion cable, international power adapter

Sold and shipped by Growmart (Hamburg, Germany), which delivers across Europe with DHL. Prices are set by the vendor and you complete your purchase on their site.