SANlight EVO 3-100 1.5, 200W

Descrizione

SANlight EVO 3-100 1.5, 200W – direct the light where your plants need it

The SANlight EVO 3-100 1.5, 200W is an LED grow light for indoor cultivation and greenhouse use. It suits beginners and experienced growers who need to adapt their lighting to the growing area. Its elongated design, adjustable hanging angle and optional dimming offer flexibility when positioning the fixture and managing light intensity.

Two lights for a 100 × 100 cm growing area

This model is designed for growing areas with a depth of 100 cm. For a grow tent measuring 100 × 100 cm, SANlight recommends using two fixtures. Their elongated shape allows lighting and ventilation equipment to sit alongside each other near the top of the tent. Tilting the fixtures directs light towards the plants and helps you adjust its distribution to suit your installation.

Broadband spectrum with light-directing secondary optics

White Seoul Semiconductor WICOP LEDs are combined with red and far-red OSRAM LEDs to produce a broadband spectrum extending beyond the conventional PAR range. Asymmetric secondary optics direct the light towards the growing area while protecting the LEDs from dirt. The stated efficacy of more than 3 µmol/J applies to the LED modules, rather than the complete lighting system.

Adjust light intensity as your plants develop

A separately available SANlight M-Dimm magnetic dimmer or SANlight EVO Bluetooth Dimmer lets you match the intensity to your plants’ lighting requirements. This allows the same fixture to serve different stages of growth, with reduced output whenever less light is needed. Both dimmers are optional accessories and are not included.

Passive cooling and accessible optical surfaces

The light uses passive cooling without fans and has an IP65-rated housing. Accessible optical surfaces make routine care straightforward. Disconnect the fixture from the mains before cleaning and use a dry cloth free from dust and grease. Avoid cleaning agents and take care not to scratch the optics.

Allow for a separate power cable and hanging accessories

You will need a suitable mains cable, such as the angled SANlight power cable for the EVO-Series. Hanging accessories with sufficient load capacity must also be obtained separately. This product is supplied as one LED grow light, not a complete lighting kit.

Technical details:

• Product type: LED grow light
• Model: SANlight EVO 3-100 1.5
• Application: Indoor cultivation and greenhouses
• Power consumption: 200 W per fixture
• Photon flux: 545 µmol/s across the 400–780 nm wavelength range
• Module efficacy: More than 3 µmol/J across 400–780 nm; not a system efficacy figure
• LED configuration: Seoul Semiconductor WICOP for white light, OSRAM for red and far-red
• Optics: Asymmetric secondary optics
• Beam angle: 90–112°
• Cooling: Passive, without fans
• Protection rating: IP65
• Length × width: 818 × 291 mm
• Weight: 4.1 kg
• Dimming: With a separately available SANlight magnetic or Bluetooth dimmer
• Recommended coverage: Two fixtures for 100 × 100 cm
• Scope of delivery: 1 × SANlight EVO 3-100 1.5, 200 W; power cable, dimmer and hanging accessories not included

SANlight EVO 1.5 Serie Data Sheet

SANlight EVO 1.5 Serie Data Sheet

SANlight EVO 1.5 Series Operating Instructions

SANlight EVO 1.5 Series Operating Instructions

Sold and shipped by Growmart (Hamburg, Germany), which delivers across Europe with DHL. Prices are set by the vendor and you complete your purchase on their site.