Aqua Master Tools C800 Pro – pH/EC/lämpötilaohjain

749,90 €
Ilmoita väärinkäytöstä

The Aqua Master Tools C800 Pro is a stationary pH, EC and temperature controller for irrigation and hydroponic systems. €749.90 · sold by Growmart

Kumppanilinkki: BudBid voi saada palkkion, jos ostat tämän linkin kautta. Se ei maksa sinulle mitään ylimääräistä.

Kuvaus

Automatic pH and EC control for nutrient reservoirs and hydro systems

The Aqua Master Tools C800 Pro is a stationary pH, EC and temperature controller for irrigation and hydroponic systems. It continuously monitors the nutrient solution and, when combined with optional modular dosing pumps, can automatically regulate both pH and nutrient concentration. In addition to pH and EC, the unit measures PPM, TDS and temperature. This makes it particularly useful for systems where water parameters need continuous supervision and dosing needs to be carried out in a consistent, repeatable way.

Modular dosing for pH and nutrients

The C800 Pro has two separate UTP outputs. The dedicated pH output accepts one dosing pump for either pH-lowering or pH-raising solution. The second output supports between one and five nutrient dosing pumps, depending on the pump configuration. You can therefore use the controller for pH regulation alone, EC regulation alone or both functions together. The modular dosing pumps are not included with the controller. Suitable adjustment products can be found in the pH correction range.

Touchscreen, alarms and controlled dosing cycles

The colour touchscreen displays live readings, alarm status and historical data directly on the controller. Upper and lower alarm limits can be configured for pH, EC and temperature. Dosing stops when the system enters an alarm state. Pump on-time can be set from 1 to 900 seconds, followed by an adjustable off-time of 0 to 60 minutes. This pause allows the dosed solution to mix through the reservoir before the controller takes the next reading and decides whether further adjustment is required.

Remote management with the Aqua Master Tools app

The Aqua Master Tools app for Android and iOS provides remote access to current readings and historical graphs, as well as alarm notifications and controls for setpoints, dosing parameters and calibration reminders. Nutrient dosing schedules can also be stored in the cloud for later reuse. Up to twelve months of measurement and alarm history can be viewed. For additional manual checks, Growmart also offers a range of pH and EC meters.

Measurement ranges and calibration

The C800 Pro covers a pH range of 0.00 to 14.00 and an EC range of 0.00 to 20.00 mS/cm. Temperature is measured from 0 to 50 °C with automatic temperature compensation. pH can be calibrated at one, two or three points using pH 4.0, 7.0 and 10.0 standards. EC uses automatic one-point calibration at 1.4, 3.0 or 12.88 mS/cm.

Technical details:

  • Product type: pH/EC controller for nutrient reservoirs, irrigation and hydroponic systems
  • Article number: AMT1050
  • EAN: 8721249602108
  • Measurement parameters: pH, EC, PPM, TDS and temperature
  • pH range: 0.00–14.00 pH
  • EC range: 0.00–20.00 mS/cm
  • TDS range: 0.00–14.00 PPT
  • PPM range: 0–14000 PPM
  • Temperature range: 0–50 °C
  • pH resolution: 0.01 or 0.1 pH
  • EC resolution: 0.01 or 0.1 mS/cm
  • TDS resolution: 0.01 or 0.1 PPT
  • PPM resolution: 7 PPM
  • Temperature resolution: 0.1 °C
  • pH accuracy: ±0.1 pH
  • EC accuracy: ±2% F.S.
  • TDS accuracy: ±2% F.S.
  • PPM accuracy: ±2% F.S.
  • Temperature accuracy: ±1.0 °C
  • Temperature compensation: automatic, 0–50 °C
  • PPM scale: 700 PPM
  • pH calibration: 1-, 2- or 3-point at pH 4.0, 7.0 and 10.0
  • EC calibration: automatic 1-point calibration at 1.4, 3.0 or 12.88 mS/cm
  • Alarms: adjustable high and low limits for pH, EC and temperature
  • Dosing control: on-time 1–900 seconds, off-time 0–60 minutes
  • Pump connections: 1 pH dosing pump and 1–5 nutrient dosing pumps via separate UTP outputs
  • Data history: measurement and alarm history for up to 12 months
  • App compatibility: Android 8.0 or later, iOS 12 or later
  • Power supply: 85–260 V AC, 50–60 Hz
  • Controller protection rating: IP63
  • Electrode protection rating: IP67
  • Controller dimensions: 94 × 210 × 55 mm
  • Weight: 656 g
  • Scope of delivery: C800 Pro Controller, pH electrode, EC electrode with integrated temperature sensor, international power adapter and user manual

Bedienungsanleitung

Bedienungsanleitung

Sold and shipped by Growmart (Hamburg, Germany), which delivers across Europe with DHL. Prices are set by the vendor and you complete your purchase on their site.

Lisätiedot

Merkki

Aqua Master Tools

Alkuperämaa

Saksa

Toimitus

Growmart

Toimitus maasta: Saksa

Toimitus maihin: Kaikki EU-maat

Ships across Europe with DHL in neutral packaging.

Kukin kauppa määrittää toimituskulut ja -ajat itse, ja ne näkyvät kaupan kassalla.

Arvostelut

Arvosteluja ei ole vielä.

Be the first to review “Aqua Master Tools C800 Pro – pH/EC/lämpötilaohjain”

Your email address will not be published. Required fields are marked *

Loading…

Tuotekysely