Descripción
AC Infinity IONBEAM Green LED Work Light, 40cm
This green LED work light is built to help you work on your plants in the dark without interrupting their cycle. With a non-invasive brightness level under 10 nmol/s, it can illuminate up to a 30 × 30 cm area while keeping photoperiod-sensitive plants undisturbed.
A removable diffuser cover creates a softer, more even light distribution and reduces glare. The included digital controller offers four dimming levels, a timer function, and UIS compatibility to integrate the light into an AC Infinity grow ecosystem.
Plant-Safe Illumination
- Produces a consistent, true green light that won’t disturb plants as long as brightness stays below 10 nmol/s
- Four dimming steps allow you to dial in the right intensity (especially useful with the diffuser)
- Can be mounted directly to grow tent poles via magnetic attachment; also works on metal frames
- With the included steel strips, the light can also be attached to fabric tent walls
- Tip: indirect lighting (bouncing light off a wall) can reduce intensity further
- Orientation note: under 10 nmol/s the environment is bright enough for plant work, but still too dim to comfortably read a book
Warnings and Safety Information
- Read and keep the full manual before installation and first use
- Install properly and only use compliant outlets; follow local regulations (consult a qualified electrician if unsure)
- Unplug before cleaning, waiting, or modifying the setup
- Do not use damaged cables or plugs; disconnect immediately if damaged and have it checked by qualified personnel
- Do not cut, crush, pinch, or route the cable over sharp edges
- Do not open, repair, or modify the device yourself—repairs only by authorized personnel
- Use only original cables/accessories recommended by the manufacturer
- Mount securely and only with included/recommended mounting materials
- Ensure adequate ventilation; do not block ventilation slots
- Avoid staring into the LEDs, even though it is green light
- Keep liquids away; device is not waterproof
- Do not use in explosive, chemically contaminated, or extremely humid environments
- Do not cover the unit during operation
- Do not rely solely on timer/automation; unplug for longer absences or maintenance
- Keep away from children and pets
- Disposal: do not dispose with household waste; return to an electronics collection point (WEEE 2012/19/EU)
Product & Mounting Dimensions
- Light dimensions: 40.7 × 2.75 cm
- Controller dimensions: 8.4 × 3.2 cm
- Cable length: 2.44 m
Power & Technical Data
- Diodes: Osram 525 nm
- LED chip count: 18 per bar
- Spectrum: 525 nm
- Power draw: 12 W
- Input voltage: 100–240 V AC (EU plug)
- Frequency: 50/60 Hz
- Current draw: 0.05 A (at 230 V)
- Controller: Dimmable timer controller
- Plug type: EU plug
- Ingress protection: IP65
- Operating humidity: 35% to 85% RH
- Operating temperature: 0 to 60°C
- Lifetime: 50,000 hours
Scope of delivery
(Only items explicitly mentioned/clearly implied by the provided content)
- Green LED work light bar
- Removable diffuser
- Dimmable timer controller (4 brightness levels)
- Steel mounting strips (for attaching to fabric tent walls / mounting support)
- Power/connection cable (2.44 m, EU plug)
Sold and shipped by Growmart (Hamburg, Germany), which delivers across Europe with DHL. Prices are set by the vendor and you complete your purchase on their site.

















Valoraciones
No hay valoraciones aún.