Dexso DEM – dimethyl ether – Gas

Description

Dexso Gas is a technical DME gas solvent, or lab purity dimethyl ether (99.99%) designed for high quality BHO extractions.dME is an alternative to butane, offering higher selectivity, better solubility of cannabinoids and terpenes, and a cleaner and faster evaporation process.

Developed in Switzerland, Dexso has been optimised for professional extractors looking for consistent, clean and safe results. Its formulation without additives, lubricants or residues guarantees a pure and stable concentrate, without off-flavours or chemical contamination.

Composition and chemical behaviour

Dimethyl ether (CH₃OCH₃) is an organic ether with a slight polarity, which allows it to interact more selectively with cannabinoids and terpenes, unlike butane, which is completely non-polar.

This slight polarity makes DME:

• Easily dissolve cannabinoids (THC, CBD, CBG, etc.), obtaining a higher extraction yield.
• Extract terpenes more completely, respecting the natural aromatic profile of the plant.
• Reduce the amount of waxes, fats and chlorophyll that usually contaminate extracts made with conventional butane.

In short, DME acts as a “smart” solvent: it removes what is of interest (cannabinoids and terpenes).
This results in a clearer, more stable and better tasting BHO.

Advantages of DME over traditional butane gases

DEXSO Gas 500 ml offers real technical advantages over common gases such as Clipper or Colibri:

• Higher extraction efficiency: DME has a higher solvent power which allows a higher percentage of resin to be recovered in less time.
• Cleaner extractions: As it evaporates completely, it leaves no oily residues or traces of industrial lubricants.
• Better aroma preservation: Thanks to its low boiling temperature (-24°C), it preserves volatile and delicate terpenes that are often degraded by butane.
• Natural compound selection: Its slight polarity prevents excessive extraction of waxes and chlorophyll, resulting in a finer and more stable concentrate.
• Faster and safer purging: It is more easily removed during purging, reducing the time needed without affecting the final quality of the extract.
• Environmentally friendly and biodegradable: Dimethyl Ether is a non-toxic, environmentally friendly gas with no impact on the ozone layer.

Material compatibility

Compatible materials:

• Stainless steel
• Borosilicate glass (Pyrex)
• Anodised aluminium

Non-compatible materials:

• PVC
• Acrylic or methacrylate
• Low density plastics

For safe extraction, it is recommended to use DME-certified metal or glass extractors with solvent-resistant seals and valves.

Directions for use and recommendations

• Use DEXSO Gas only in ventilated spaces or outdoors.
• Do not smoke or use near open flames or heat sources.
• Always use closed extractors compatible with DME.
• Keep container upright during use.
• After extraction, completely purge the material by controlled heat or vacuum to remove any remaining gaseous residues.
• Product intended for technical or laboratory use only. Not for direct inhalation or as a domestic gas. Keep out of reach of children.

Characteristics of Dexso DME Gas:

• Product type: Technical solvent for BHO extractions
• Composition: Ultra pure Dimethyl Ether (CH₃OCH₃)
• Purity: 99.99%.
• Format: 500 ml pressurized bottle
• Solvent strength: High for cannabinoids and terpenes
• Reduces the extraction of waxes and lipids
• Effect on terpenes: Preserves delicate aromatic profiles
• Recommended use: BHO extractions with compatible equipment
• Origin: Made in Switzerland

Sold and shipped by Alchimia Grow Shop (Girona, Spain). Prices are set by the vendor and you complete your purchase on their site.